High-purity Stainless Steel regulators designed for delivery pressures up to 2500 psig.  Seal material choices are Viton/Teflon or EPR/Vespel.  Hydrogen sulfide mixes need to have the EPR/Vespel seals while hydrogen chloride mixtues need to have the Viton/Teflon seals.  Viton/Teflon is good for most other gases.

Applications

• Applications requiring delivery pressures up to 2500 psig.
• Delivery of gas to manufacturing processes, charging of systems, purging.

Design Features

• High-purity Stainless Steel body
• 316 stainless steel piston
• 2” inlet and delivery pressure gauges
• Equipped with outlet needle valve
• 1/4” MNPT outlet connection (std)
• Porous metal filter protects seat from contamination
• Panel mountable

*Note: where CGA is replaced by the actual CGA number. Some CGA limitations may apply. (NI) for 1/4" FNPT inlet

Materials of Construction

• Gauges: Stainless Steel
• Body: Stainless Steel
• Bonnet: Nickel plated brass
• Piston: 316 stainless steel

Specifications

• Maximum Inlet Pressure: 3000 psig (24,100 kPa)
• Maximum Flow Rate (At 2500 psig, N2):
          Model 3030S: 4600 SCFH (2170 SLPM)
          Model 3040S: 4600 SCFH (2170 SLPM)
• Flow Capacity (Cv): 0.06
• Operating Temperature: -15°F to 165°F (-26°C to 74°C)
• Porting (Regulator Body): 1/4”NPT Female
• Porting Configuration: 2 High, 2 Low

	Mounting Options
	Mounting Bracket for Regulators Mounting Nuts are also needed (see below). The regulator knob will have to be removed in order to mount on this bracket.
	Mounting Nuts These nuts can be used either with the above bracket or for mounting in a panel.
	54 Series Protocol Station This stainless steel manifold is designed to provide a safe, reliable way of wall-mounting a cylinder regulator. Manifolds are provided a durable stainless steel bracket, stainless steel flex hose (3 ft std.), and a CGA connection with integral check valve.

Flow Curves

Flow Curves, 3030/3040 Series

Instructions

Instructions, General Regulator