Products

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

Products

Categories

GEN-0287-XX 3 LPM Zero Air Generator

USD $3,002.00 USD $2,402.00
(You save USD $600.00)

GEN-0287-XX 3 LPM Zero Air Generator

USD $3,002.00 USD $2,402.00
(You save USD $600.00)
Part Number:    SEQ GEN0287XX
   Availability:   Ships within 24 hours from Montgomeryville, PA


Request Quote

Product Description

 

The Chrysalis® II ZERO Air Generators continuously produce high purity air from plant compressed air.  The standard “GC/FID” model removes hydrocarbon and carbon monoxide impurities to less than 0.1 ppm. This models also efficiently remove particulates down to 0.5 micron in size. The use of Chrysalis® II ZERO Air Generators in the lab provides several advantages. Valuable laboratory floor space is conserved by eliminating the need to use and store high purity air in cylinders. There is no need to continually buy replacement UHP grade air in cylinders. Using an onsite gas generator eliminates the need to recalibrate  instruments after replacing empty cylinders with full ones. Chrysalis® II ZERO Air Generators provide continuous flow and require low levels of air consumption and electrical power. They are easy to install and require only minimal maintenance. The standard “GC/FID” model receives the plant compressed air through a highly efficient coalescing/particulate pre-filter that removes particulates and moisture. The air then flows through a stainless steel, heated platinum catalytic combustion module, where hydrocarbons and carbon monoxide are oxidized. After cooling, a filter at the outlet is used as a final purification step to remove any remaining moisture and residual particulate material.

Product Features

• Compact size requires minimal space
• Wall mountable
• Built-in security lock on external housing
• Green, yellow and red indicating lights indicate power, warmup, ready and fault notification of low/high catalyst temperature, low/high inlet pressure, and life expectancy/expiration of catalyst
• Digital thermal switch automatically shuts off power to the catalyst in the event that the inlet compressed air supply is turned off, preventing catalyst damage due to overheating
• Power cord included
• CE & CSA approved

Specifications

Zero Air purity: less than 0.1 ppm total hydrocarbons measured as methane
Maximum flow rate: 3.0 l/min (supports 6 FIDs)
Catalyst oven: stainless steel and platinum blend
Filtration: coalescing with auto-drain, final particle trap/ polisher
Delivery pressure: up to 145 psig / 10 barg
Input/ outlet connection: 1/4” / 1/8” FNPT
Dimensions: 18.5” x 16.1” x 9.8” (W x H X D)  470mm x 410mm x 250mm
Weight: 26.5 lbs / 12 kg

 

Warranty Information

Find Similar Products by Category